Technical data

RackSwitch G8000 ISCLI Reference
74
 Chapter 3: Statistics Commands BMD00128, September 2009
Server Timeout Sets the time, in seconds, the authenticator waits for a response from the
Radius server before declaring an authentication timeout. The default
value is 30 seconds.
The time interval between transmissions of the RADIUS Access-Request
packet containing the supplicant’s (client’s) EAP-Response packet is
determined by the current setting of /cfg/sys/radius/timeout (default is
three seconds).
Reauth Status Sets the re-authentication status to on or off. The default value is off.
Reauth Period Sets the time, in seconds, the authenticator waits before re-authenticating
a supplicant (client) when periodic re-authentication is enabled. The
default value is 3600 seconds.
Table 3-4 802.1X Authenticator Diagnostics of a Port
Statistics Description