Technical data

RackSwitch G8000 ISCLI Reference
Chapter 3: Statistics Commands
 71BMD00128, September 2009
Port 802.1X Authenticator Statistics
Use the following command to display the 802.1X authenticator statistics for the selected port:
show interface port {<port number, or range of ports>} dot1x counters
Command mode: All
clear interfaces
Clears statistics for all ports.
Command mode: All except User EXEC
show interface port {<port number, or range of ports>} link-counters
Displays link statistics for the port. To view an example of the command output, see page 83.
Command mode: All
clear interface port {<port number, or range of ports>} counters
Clears all statistics counters for the selected ports.
Command mode: Global configuration
clear interfaces counters
Clears statistics counters for all ports.
Command mode: All except User EXEC
Authenticator Statistics:
--------------------------
eapolFramesRx = 0
eapolFramesTx = 0
eapolStartFramesRx = 0
eapolLogoffFramesRx = 0
eapolRespIdFramesRx = 0
eapolRespFramesRx = 0
eapolReqIdFramesTx = 0
eapolReqFramesTx = 0
invalidEapolFramesRx = 0
eapLengthErrorFramesRx = 0
lastEapolFrameVersion = 0
lastEapolFrameSource = 00:00:00:00:00:00
Table 3-2 Port Statistics Commands
Command Syntax and Usage