Technical data

RackSwitch G8000 ISCLI Reference
70
 Chapter 3: Statistics Commands BMD00128, September 2009
Port Statistics
These commands display traffic statistics on a port-by-port basis. Traffic statistics include
SNMP Management Information Base (MIB) objects.
Table 3-2 Port Statistics Commands
Command Syntax and Usage
show interface port {<port number, or range of ports>} bridging-counters
Displays bridging (“dot1”) statistics for the port. To view an example of the command output, see
page 75.
Command mode: All
show interface port {<port number, or range of ports>} dot1x
Displays IEEE 802.1X statistics for the port. To view an example of the command output, see
page 73.
Command mode: All
show interface port {<port number, or range of ports>} ethernet-counters
Displays Ethernet (“dot3”) statistics for the port. To view an example of the command output, see
page 76.
Command mode: All
show interface port {<port number, or range of ports>} interface-counters
Displays interface statistics for the port. To view an example of the command output, see page 78.
Command mode: All
show interface port {<port number, or range of ports>} ip-counters
Displays IP statistics for the port. To view an example of the command output, see page 81.
Command mode: All
show interface port {<port number, or range of ports>} lacp counters
Displays Link Aggregation Control Protocol (LACP) statistics for the port. To view an example of
the command output, see page 82.
Command mode: All
show interface port {<port number, or range of ports>} link-counters
Displays link statistics for the port. To view an example of the command output, see page 83.
Command mode: All
clear interface port {<port number>} counters
Clears all statistics for the port.
Command mode: All except User EXEC