Technical data

RackSwitch G8000 ISCLI Reference
Chapter 2: Information Commands
 63BMD00128, September 2009
Interface Link Information
The following command displays port link status for each port on the switch:
show interface link
Command mode: All except User EXEC
Port link information includes the following:
 Port alias and number
 Port speed (10, 100, 1000, or any)
 Duplex mode (half, full, or any)
 Flow control for transmit and receive (no or yes)
 Link status (up, down, or disabled)
RS G8000(config)# show interface link
------------------------------------------------------------------
Alias Port Speed Duplex Flow Ctrl Link
----- ---- ----- -------- --TX-----RX-- ------
1:1 65 any any yes yes down
1:2 66 any any yes yes down
1:3 67 any any yes yes down
1:4 68 any any yes yes down
1:5 69 any any yes yes down
1:6 70 any any yes yes down
1:7 71 any any yes yes down
1:8 72 any any yes yes down
1:9 73 any any yes yes down
1:10 74 any any yes yes down
1:11 75 any any yes yes down
1:12 76 any any yes yes down
1:13 77 any any yes yes down
1:14 78 any any yes yes down
1:15 79 any any yes yes down
1:16 80 any any yes yes down
1:17 81 any any yes yes down
1:18 82 any any yes yes down
1:19 83 any any yes yes down
1:20 84 any any yes yes down
...