Technical data

RackSwitch G8000 ISCLI Reference
56
 Chapter 2: Information Commands BMD00128, September 2009
IGMP Multicast Group Information
Table 2-22 IGMP Multicast Group Information Commands
Command Syntax and Usage
show ip igmp groups address <IP address>
Displays IGMP multicast group information by the group’s IP address.
Command mode: All
show ip igmp groups interface port <port number>
Displays all IGMP multicast groups on a single port.
Command mode: All
show ip igmp groups portchannel <trunk number>
Displays all IGMP multicast groups on a selected trunk group.
Note that portchannel 1-52 indicates static trunks, and portchannel 53-104 indicate LACP trunks.
Command mode: All
show ip igmp groups vlan <1-4094>
Displays all IGMP multicast groups on a selected VLAN.
Command mode: All
show ip igmp groups
Displays information for all multicast groups.
Command mode: All
show ip igmp mrouter information
Displays IGMP Multicast Router information.
Command mode: All
show ip igmp mrouter vlan <1-4094>
Displays IGMP multicast routers for the selected VLAN.
Command mode: All