Technical data

RackSwitch G8000 ISCLI Reference
54
Chapter 2: Information Commands BMD00128, September 2009
ARP Information
The ARP information includes IP address and MAC address of each entry, address status flags,
VLAN and port for the address, and port referencing information.
Table 2-21 ARP Information Commands
Command Syntax and Usage
show ip arp find <IP address>
Displays a single ARP entry by IP address.
Command mode: All
show ip arp vlan <1-4094>
Displays all ARP entries learned on the selected VLAN.
Command mode: All
show ip arp interface port <port number>
Displays ARP entries learned on the selected port.
Command mode: All
show ip arp reply
Shows the list of IP addresses that the switch will respond to for ARP requests.
Command mode All
show ip arp
Displays information about all ARP entries, including:
Re-ARP interval
Static ARP entries
IP address and MAC address of each entry
Address mapping
The interface to which the address belongs
Command mode: All
To view an example of the command output, see page 56.