Technical data
RackSwitch G8000 ISCLI Reference
Chapter 2: Information Commands
53BMD00128, September 2009
Layer 3 Information
The following table lists general Layer 3 information commands. The following sections con-
tain more detailed commands
The following command displays Layer 3 information:
show layer3 information
Command mode: All
Table 2-20 Layer 3 Information Commands
Command Syntax and Usage
show layer3 information
Dumps all Layer 3 switch information available (10K or more, depending on your configuration).
If you want to capture dump data to a file, set your communication software on your workstation to
capture session data prior to issuing the dump commands.
Command mode: All
Interface information:
1: 10.1.1.1 255.255.0.0 10.1.1.255,vlan1, up
Default gateway information:
10.1.1.2, enabled, active
Master switch IP interface configured through DHCP
MAC address: 00:22:00:ac:bd:1f
IP address: 127.31.37.158
Subnet mask: 255.255.0.0
Default gateway: 127.31.1.1
DHCP Server: 127.31.35.1
Lease Obtained: 11:35:44 Mon Aug 3, 2009
Lease Expires: 14:31:40 Mon Aug 10, 2009
Current ARP configuration:
rearp 5
ARP cache information:
IP Address Flags Hardware Address Interface
-------------- ------ ----------------- ---------
10.1.1.1 00:15:40:07:20:42 1
Route table information:
Status code: * - best
Destination Mask Gateway Type Tag Metr If
--------------- --------------- --------------- ---------- ---------- ---- ---
* 10.1.1.0 255.255.255.0 0.0.0.0 direct fixed 1
* 10.1.1.1 255.255.255.255 10.1.1.1 local addr 0 1
* 10.1.1.255 255.255.255.255 10.1.1.255 bcast bcast 0 1