Technical data

RackSwitch G8000 ISCLI Reference
Chapter 2: Information Commands
 51BMD00128, September 2009
Trunk Group Information
Use these commands to display information about trunk groups (portchannels).
Authenticator
PAE State
Displays the Authenticator Port Access Entity State. The PAE state can be
one of the following:
 initialize
 disconnected
 connecting
 authenticating
 authenticated
 aborting
 held
 forceAuth
Backend
Auth State
Displays the Backend Authorization State. The Backend Authorization state
can be one of the following:
 initialize
 request
 response
 success
 fail
 timeout
 idle
Assigned VLAN Displays the VLAN assigned to the port, if applicable.
Table 2-19 Portchannel information commands
Command Syntax and Usage
show portchannel <trunk number>
Displays information about the selected static trunk group.
Command mode: All
show portchannel <LACP trunk number>
Displays information about the selected LACP trunk group.
Command mode: All
show portchannel information
Displays a summary of trunk group information. To view an example of the command output, see
page 52.
Command mode: All
Table 2-18 802.1X Parameter Descriptions (Continued)(/info/l2/8021x)
Parameter Description