Technical data

RackSwitch G8000 ISCLI Reference

 Chapter 2: Information Commands BMD00128, September 2009

802.1X Information

The following command displays 802.1X information:

show dot1x

Command mode: All

The following table describes the IEEE 802.1X parameters.

System capability : Authenticator

System status : enabled

Protocol version : 1

Guest VLAN status : disabled

Guest VLAN : none

Authenticator Backend Assigned

Port Auth Mode Auth Status PAE State Auth State VLAN

----- ------------ ------------ -------------- ---------- ------

*1:1 force-auth unauthorized initialize initialize none

*1:2 force-auth unauthorized initialize initialize none

*1:3 force-auth unauthorized initialize initialize none

*1:4 force-auth unauthorized initialize initialize none

*1:5 force-auth unauthorized initialize initialize none

*1:6 force-auth unauthorized initialize initialize none

*1:7 force-auth unauthorized initialize initialize none

*1:8 force-auth unauthorized initialize initialize none

*1:9 force-auth unauthorized initialize initialize none

*1:10 force-auth unauthorized initialize initialize none

*1:11 force-auth unauthorized initialize initialize none

*1:12 force-auth unauthorized initialize initialize none

...

------------------------------------------------------------------

* - Port down or disabled

Table 2-18 802.1X Parameter Descriptions (/info/l2/8021x)

Parameter Description

Port Displays each port’s alias.

Auth Mode Displays the Access Control authorization mode for the port. The Authoriza-

tion mode can be one of the following:

 force-unauth

 auto

 force-auth

Auth Status Displays the current authorization status of the port, either authorized or

unauthorized.