Technical data

RackSwitch G8000 ISCLI Reference
48
 Chapter 2: Information Commands BMD00128, September 2009
 selected
Indicates whether the port has been selected to be part of a Link Aggregation Group.
 prio
Shows the value of the port priority.
 attached aggr
Displays the aggregator associated with each port.
 trunk
This value represents the LACP trunk group number.
 status
This value represents the status of the port in LACP (active or down).
Layer 2 Failover Information
Table 2-17 Layer 2 Failover Information commands
Command Syntax and Usage
show failover trigger <1-8>
Displays detailed information about the selected Layer 2 Failover trigger.
Command mode: All
show failover
Displays a summary of Layer 2 Failover information.
Command mode: All
For details, see page 47.