Technical data

RackSwitch G8000 ISCLI Reference

 Chapter 2: Information Commands BMD00128, September 2009

Show All FDB Information

The following command displays Forwarding Database information:

show mac-address-table

Command mode: All

An address that is in the forwarding (FWD) state has been learned by the switch on a port (not a

portchannel/trunk group). Addresses in the trunking (TRK) state have been learned through a

portchannel/trunk group. If the state of the port is listed as unknown (UNK), the MAC address

has not yet been learned by the switch, but has only been seen as a destination address. When

an address is in the unknown state, no outbound port is indicated, although ports which refer-

ence the address as a destination will be listed under “Reference ports.”

Clearing Entries From the Forwarding Database

To delete a MAC address from the forwarding database (FDB) or to clear the entire FDB, see

“Forwarding Database Maintenance” on page 189.

Mac address Aging Time: 300

MAC address VLAN Port Trnk State

----------------- ---- ---- ---- -----

00:01:02:03:04:05 1 14 FWD

00:03:47:0a:54:19 1 14 FWD

00:07:e9:39:07:8a 1 14 FWD

00:08:74:a9:1d:e9 1 14 FWD

00:09:6b:ca:1a:be 1 14 FWD

00:09:97:16:69:00 1 14 FWD

00:0e:0c:b3:65:4d 1 14 FWD

00:0f:fe:2d:f5:39 1 14 FWD

00:0f:fe:af:b7:6e 1 14 FWD

00:0f:fe:b0:62:0e 1 14 FWD

00:0f:fe:b3:de:7e 1 14 FWD

00:11:11:e3:70:50 1 14 FWD

00:11:25:c3:2a:3c 1 14 FWD

00:13:0a:4f:7c:90 1 14 FWD

00:15:ed:00:00:00 1 14 FWD

00:16:17:7c:e0:c0 1 14 FWD

00:16:17:81:10:a9 1 14 FWD

00:16:17:81:13:b7 1 14 FWD