Technical data

RackSwitch G8000 ISCLI Reference
Chapter 2: Information Commands
 41BMD00128, September 2009
Stacking Information
Table 2-13 lists the Stacking Information commands.
Table 2-13 Stacking Information commands
Command Syntax and Usage
show stack switch
Displays information about each switch in the stack, including:
 Configured Switch Number (csnum)
 Assigned Switch Number (asnum)
 MAC address
 Stacking state
Command mode: All except user EXEC
show stack link
Displays link information for each switch in the stack.
Command mode: All except user EXEC
show stack name
Displays the configured name of the stack.
Command mode: All except user EXEC
show stack version
Displays the firmware version number for the selected switch.
Command mode: All except user EXEC
show stack master-ip-interface
Displays the IP address and gateway of the Master Switch Interface.
Command mode: All except user EXEC
show stack backup-ip-interface
Displays the IP address and gateway of the Backup Switch Interface.
Command mode: All except user EXEC
show stack path-map [<csnum 1-6>]
Displays the Stacking packet path map that shows how the stack switches are connected.
Command mode: All except user EXEC
show stack push-status
Displays the status of the most recent firmware and configuration file push from the master to
member switches.
Command mode: All except user EXEC