Technical data

RackSwitch G8000 ISCLI Reference
38
 Chapter 2: Information Commands BMD00128, September 2009
General System Information
The following command displays system information:
show sys-info
Command mode: All
NOTE – The temperature sensor display is only visible if the temperature of any of the sensors
exceeds the temperature threshold. There will be a warning from the software if any of the sen-
sors exceeds this temperature threshold. The switch will shut down if the power supply over-
heats.
Blade Network Technologies Rack Switch G8000
System Information at
Sun Jan 15 23:56:24 2009
Switch has been up for 0 day, 0 hour, 19 minutes and 31 seconds
Last boot:(power cycle)
MAC address: 00:18:b1:8a:36:00 IP (If 1) address: 172.24.1.70
Revision: 8
Switch Serial No: US38200028
Spare Part No: BAC-00017-00
Manufacturing date: 08/20
Software Version 6.0.1 (FLASH image2), active configuration.
Fans are in Forward AirFlow, Warning at 55 C and Recover at 80 C
Temperature Sensor 1: 32.0 C
Temperature Sensor 2: 38.0 C
Temperature Sensor 3: --.-
Temperature Sensor 4: 31.0 C
Speed of Fan 1: 0 RPM
Speed of Fan 2: 0 RPM
Speed of Fan 3: 0 RPM
Speed of Fan 4: 4224 RPM
Speed of Fan 5: 6272 RPM
State of Power Supply 1: On
State of Power Supply 2: Off