Technical data

RackSwitch G8000 ISCLI Reference
Chapter 2: Information Commands
 33BMD00128, September 2009
SNMPv3 Target Address Table Information
The following command displays SNMPv3 target address information:
show snmp-server v3 target-address
Command mode: All
This command displays the SNMPv3 target address table information, which is stored in the
SNMP engine.
SNMPv3 Target Parameters Table Information
The following command displays SNMPv3 target parameters information:
show snmp-server v3 target-parameters
Command mode: All
Name Transport Addr Taglist Params
---------- --------------- ------- ----------
trap1 47.81.25.66 v1v2trap v1v2param
Table 2-9 SNMPv3 Target Address Table Information Parameters
Field Description
Name Displays the locally arbitrary, but unique identifier associated with
this snmpTargetAddrEntry.
Transport Addr Displays the transport addresses.
Taglist This column contains a list of tag values which are used to select tar-
get addresses for a particular SNMP message.
Params The value of this object identifies an entry in the snmpTargetParam-
sTable. The identified entry contains SNMP parameters to be used
when generating messages to be sent to this transport address.
Name MP Model User Name Sec Model Sec Level
--------------- -------- -------------- --------- ---------
v1v2param snmpv2c v1v2only snmpv1 noAuthNoPriv