Technical data

RackSwitch G8000 ISCLI Reference
Chapter 2: Information Commands
 27BMD00128, September 2009
show snmp-server v3 group
Displays information about the group that includes the security model, user name, and group
name. A group is a combination of security model and security name that defines the access rights
assigned to all the security names belonging to that group. The group is identified by a group
name. To view an example of the command output, see page 31.
Command mode: All
show snmp-server v3 community
Displays the community table information stored in the SNMP engine. To view an example of the
command output, see page 31.
Command mode: All
show snmp-server v3 target-address
Displays the Target Address table information. You can configure the target parameters entry and
store it in the target parameters table in the SNMP engine. This table contains parameters that are
used to generate a message. The parameters include the message processing model (for example:
SNMPv3, SNMPv2c, SNMPv1), the security model (for example: USM), the security name, and
the security level (noAuthnoPriv, authNoPriv, or authPriv). To view an example of the command
output, see page 32.
Command mode: All
show snmp-server v3 target-parameters
Displays the current target parameters table information. To view an example of the command out-
put, see page 33.
Command mode: All
show snmp-server v3 target-parameters <1-16>
Displays the Target parameters table index for the selected parameter. To view an example of the
command output, see page 33.
Command mode: All
show snmp-server v3 notify
Displays the notify table information. To view an example of the command output, see page 34.
Command mode: All
show snmp-server v3
Displays all the SNMPv3 information. To view an example of the command output, see page 35.
Command mode: All
Table 2-3 SNMPv3 Commands
Command Syntax and Usage