Technical data
RackSwitch G8000 ISCLI Reference
22
Chapter 1: ISCLI Basics BMD00128, September 2009
Idle Timeout
By default, the switch will disconnect your Telnet session after five minutes of inactivity. This
function is controlled by the following command, which can be set from 1 to 60 minutes:
system idle <1-60>
Command mode: Global Configuration
Table 1-3 User Access Levels
User Account Description and Tasks Performed Password
User The User has no direct responsibility for switch management.
He or she can view all switch status information and statistics,
but cannot make any configuration changes to the switch.
user
Operator Interaction with the switch is completely passive—nothing can
be changed on the G8000. Users can display information that
has no security or privacy implications, such as switch statistics
and current operational state information. Users who have an
ID with oper privileges can make operational changes, such as
running operational-level commands to disable an interface.
Administrator
The superuser Administrator has complete access to all com-
mand modes, information, and configuration commands on the
switch, including the ability to change both the user and admin-
istrator passwords.
admin