Technical data

RackSwitch G8000 ISCLI Reference
Chapter 1: ISCLI Basics
 19BMD00128, September 2009
[no] prompting Enables or disables CLI prompts. Prompts allow you to step through com-
plex configurations, and provide supporting information. You can disable
prompting to facilitate CLI scripting.
The default value is enabled.
show who Displays a list of users who are currently logged in. For more information,
see “User Status” on page 37.
show history This command brings up the history of the last 10 commands.
traceroute Use this command to identify the route used for station-to-station connectiv-
ity across the network. The format is as follows:
traceroute <host name>| <IP address> [<max-hops (1-32)>
[delay]]
Where IP address is the hostname or IP address of the target station, max-
hops (optional) is the maximum distance to trace (1-32 devices), and delay
(optional) is the number of seconds for wait for the response. The DNS
parameters must be configured if specifying hostnames.
Table 1-2 Description of Global Commands
Command Action