Technical data

RackSwitch G8000 ISCLI Reference
Chapter 6: Boot Options
 183BMD00128, September 2009
Using SNMP with Switch Images and
Configuration Files
This section describes how to use MIB calls to work with switch images and configuration
files. You can use a standard SNMP tool to perform the actions, using the MIBs listed in
Table 6-3.
The examples in this section use the MIB name, but you can also use the OID.
Table 6-3 lists the MIBS used to perform operations associated with the G8000 switch image
and configuration files. These MIBS are contained within in the file “g8000.mib”
The following SNMP actions can be performed using the MIBs listed in Table 6-3.
 Load a new Switch image (boot or running) from a TFTP server.
 Load a previously saved switch configuration from a TFTP server.
 Save the switch configuration to a TFTP server.
Table 6-3 MIBs for Switch Image and Configuration Files
MIB Name MIB OID
agTftpServer 1.3.6.1.4.1.26543.100.100.17.3.1.0
agTftpImage 1.3.6.1.4.1.26543.100.100.17.3.2.0
agTftpImageFileName 1.3.6.1.4.1.26543.100.100.17.3.3.0
agTftpCfgFileName 1.3.6.1.4.1.26543.100.100.17.3.4.0
agTftpAction 1.3.6.1.4.1.26543.100.100.17.3.5.0
agTftpLastActionStatus 1.3.6.1.4.1.26543.100.100.17.3.6.0