Technical data

RackSwitch G8000 ISCLI Reference
182
 Chapter 6: Boot Options BMD00128, September 2009
Using the Boot Management menu
The Boot Management menu allows you to switch the software image, reset the switch to fac-
tory defaults, or to recover from a failed software download.
You can interrupt the boot process and enter the Boot Management menu from the serial con-
sole port. When the system displays Memory Test, press the <Shift> key and the <B> key at
the same time. The Boot Management menu appears.
The Boot Management menu allows you to perform the following actions:
 To change the boot image, press 1 and follow the screen prompts.
 To change the configuration block, press 2, and follow the screen prompts.
 To perform an Xmodem download, press 3 and follow the screen prompts.
 To exit the Boot Management menu, press 4. The boot process continues.
Resetting the System ...
Memory Test ................................
Boot Management Menu
1 - Change booting image
2 - Change configuration block
3 - Xmodem download
4 - Exit
Please choose your menu option: 1
Current boot image is 1. Enter image to boot: 1 or 2: 2
Booting from image 2