Technical data

RackSwitch G8000 ISCLI Reference
Chapter 6: Boot Options
 177BMD00128, September 2009
Updating the Switch Software Image
The switch software image is the executable code running on the switch. A version of the
image ships with the switch, and comes pre-installed. As new versions of the image are
released, you can upgrade the software running on your switch. To get the latest
version of software available for your switch, go to:
http://www.bladenetwork.net/support_services_rackswitch.html
Click on software updates. Use the following command to determine the current software
version:
To upgrade the software image on your switch, perform the following steps:
 Load the new boot image and software image onto a TFTP server on your network.
 Transfer the new boot image and software image from the TFTP server to your switch.
 Select the new software image to be loaded into switch memory the next time the switch is
reset.
RS G8000# show boot