Technical data

RackSwitch G8000 ISCLI Reference
Chapter 4: Configuration Commands
 165BMD00128, September 2009
ACL Re-Mark Configuration
You can choose to re-mark IP header data for the selected ACL or ACL Group. You can con-
figure different re-mark values, based on whether packets fall within the ACL Metering pro-
file, or out of the ACL Metering profile.
Re-Marking In-Profile Configuration
access-control list {<1-768>} meter action {drop|pass}
Configures the ACL Meter to either drop or pass out-of-profile traffic.
Command mode: Global configuration
show access-control list {<1-768>} meter
Displays current ACL Metering parameters.
Command mode: All
Table 4-59 Re-Mark Configuration Commands
Command Syntax and Usage
access-control list {<1-768>} re-mark in-profile dscp <0-63>
Sets the DiffServ Code Point (DSCP) of In-Profile packets to the selected value.
Command mode: Global configuration
show access-control list {<1-768>} re-mark
Displays current Re-Mark In-Profile parameters.
Command mode: All
Table 4-58 ACL Metering Configuration Commands
Command Syntax and Usage