Technical data

RackSwitch G8000 ISCLI Reference
164
 Chapter 4: Configuration Commands BMD00128, September 2009
ACL Group Configuration
These commands allow you to compile one or more ACLs into an ACL Group. Once you cre-
ate an ACL Group, you can assign the ACL Group to one or more ports.
ACL Metering Configuration
These commands define the Access Control profile for the selected ACL or ACL Group.
Table 4-57 ACL Group Configuration Commands
Command Syntax and Usage
access-control group {<1-768>} list <1-768>
Adds the selected ACL to the ACL Group.
Command mode: Global configuration
no access-control group {<1-768>} list <1-768>
Removes the selected ACL from the ACL Group.
Command mode: Global configuration
show access-control group <1-768>
Displays the current ACL group parameters.
Command mode: All except User EXEC
Table 4-58 ACL Metering Configuration Commands
Command Syntax and Usage
access-control list {<1-768>} meter action {permit|deny}
Configures a filter action for packets that match the ACL definitions. You can choose to permit
(pass) or deny (drop) packets.
Command mode: Global configuration
access-control list {<1-768>} meter committed-rate <1000-1000000>
Configures the committed rate, in Kilobits per second. The committed rate must be a multiple
of 64.
Command mode: Global configuration
access-control list {<1-768>} meter maximum-burst-size <32-4096>
Configures the maximum burst size, in Kilobits. Enter one of the following values for
mbsize: 32, 64, 128, 256, 512, 1024, 2048, 4096
Command mode: Global configuration
[no] access-control list {<1-768>} meter enable
Enables or disables ACL Metering.
Command mode: Global configuration