Technical data

RackSwitch G8000 ISCLI Reference
Chapter 4: Configuration Commands
 163BMD00128, September 2009
Packet Format Filtering Configuration
These commands allow you to define Packet Format matching criteria for an ACL.
default access-control list {<1-768>} tcp-udp
Resets the TCP/UDP parameters for the ACL to their default values.
Command mode: Global configuration
show access-control list {<1-768>} tcp-udp
Displays the current TCP/UDP Filtering parameters.
Command mode: All except User EXEC
Table 4-56 Packet Format Filtering Configuration Commands
Command Syntax and Usage
access-control list {<1-768>} packet-format ethernet {ethertype2|
snap|llc}
Defines the Ethernet format for the ACL.
Command mode: Global configuration
[no] access-control list {<1-768>} packet-format tagged
Defines the tagging format for the ACL.
Command mode: Global configuration
[no] access-control list {<1-768>} packet-format ip {ipv4|ipv6}
Defines the IP format for the ACL.
Command mode: Global configuration
default access-control list {<1-768>} packet-format
Resets Packet Format parameters for the ACL to their default values.
Command mode: Global configuration
show access-control list {<1-768>} packet-format
Displays the current Packet Format parameters for the ACL.
Command mode: All except User EXEC
Table 4-55 TCP/UDP Filtering Configuration Commands
Command Syntax and Usage