Technical data

RackSwitch G8000 ISCLI Reference
150
 Chapter 4: Configuration Commands BMD00128, September 2009
Failover Manual Monitor - Control Configuration
Use this menu to define the port link(s) to control.
The Manual Monitor - Control configuration accepts internal and external ports, but not man-
agement ports.
Figure 4-1 Failover Manual Monitor - Control commands
Command Syntax and Usage
failover trigger <1-8> mmon control member <port number>
Adds the selected port to the Manual Monitor - Control.
Command mode: Global configuration
no failover trigger <1-8> mmon control member <port number>
Removes the selected port from the Manual Monitor - Control.
Command mode: Global configuration
failover trigger <1-8> mmon control portchannel <trunk number>
Adds the selected trunk group to the Manual Monitor - Control.
Command mode: Global configuration
no failover trigger <1-8> mmon control portchannel <trunk number>
Removes the selected trunk group to the Manual Monitor - Control.
Command mode: Global configuration
failover trigger <1-8> mmon control adminkey <1-65535>
Adds an LACP admin key to the Manual Monitor - Monitor. LACP trunks formed with
this admin key will be included in the Manual Monitor - Control.
Command mode: Global configuration
no failover trigger <1-8> mmon control adminkey <1-65535>
Removes an LACP admin key from the Manual Monitor - Control.
Command mode: Global configuration
show failover
Displays the current Failover settings.
Command mode: All except User EXEC