Technical data

RackSwitch G8000 ISCLI Reference
148
 Chapter 4: Configuration Commands BMD00128, September 2009
Layer 2 Failover Configuration
Use these commands to configure Layer 2 Failover. For more information about Layer 2
Failover, see “High Availability” in the BLADE OS Application Guide.
Failover Trigger Configuration
Table 4-40 Layer 2 Failover Configuration Commands
Command Syntax and Usage
failover enable
Globally turns Layer 2 Failover on.
Command mode: Global configuration
no failover enable
Globally turns Layer 2 Failover off.
Command mode: Global configuration
show failover
Displays current Layer 2 Failover parameters.
Command mode: All
Table 4-41 Failover Trigger Configuration Commands
Command Syntax and Usage
[no] failover trigger <1-8> enable
Enables or disables the Failover trigger.
Command mode: Global configuration
no failover trigger <1-8>
Deletes the Failover trigger.
Command mode: Global configuration
failover trigger <1-8> limit <0-1024>
Configures the minimum number of operational links allowed within each trigger before the trig-
ger initiates a failover event. If you enter a value of zero (0), the switch triggers a failover event
only when no links in the trigger are operational.
Command mode: Global configuration
show failover trigger <1-8>
Displays the current failover trigger settings.
Command mode: All except User EXEC