Technical data

RackSwitch G8000 ISCLI Reference
128
 Chapter 4: Configuration Commands BMD00128, September 2009
Port Configuration
Use the Interface port commands to configure settings for individual switch ports.
Table 4-23 Port Configuration Commands
Command Syntax and Usage
interface port <port number>
Enter Interface Port configuration mode for the selected port.
Command mode: Global configuration
interface portchannel <trunk group number>
Enter Interface PortChannel (trunk group) configuration mode for the selected trunk group. This
mode allows you to configure port settings for the trunk group.
Command mode: Global configuration
[no] auto
Configures the port’s transmission media as automatic.
Command mode: Interface port
[no] bpdu-guard
Enables or disables BPDU Guard. If Spanning Tree BPDUs are received on the port, BPDU Guard
disables the port.
Command mode: Interface port
dot1p <0-7>
Configures the port’s 802.1p priority level.
Command mode: Interface port
[no] dscp-marking
Enables or disables DSCP re-marking on a port.
Command mode: Interface port
[no] name <1-64 characters>
Configures a name for the port. The assigned port name displays next to the port number on some
information and statistics screens.
Command mode: Interface port
pvid <1-4094>
Sets the default VLAN number which will be used to forward frames which are not VLAN tagged.
Command mode: Interface port