Technical data

RackSwitch G8000 ISCLI Reference
Chapter 4: Configuration Commands
 127BMD00128, September 2009
System User ID Configuration
access user operator-password <1-128 characters>
Sets the operator (oper) password. The operator has no direct responsibility for switch manage-
ment. The operator can view switch status information and statistics, but cannot make any configura-
tion changes.
Command mode: Global configuration
access user administrator-password <1-128 characters>
Sets the administrator (admin) password. The super user administrator has complete access to all
information and configuration commands on the switch, including the ability to change both the
user and administrator passwords.
Access includes “oper” functions.
Command mode: Global configuration
show access user
Displays the current user status.
Command mode: All except User EXEC
Table 4-22 User ID Configuration Commands
Command Syntax and Usage
access user {<1-10>} level {administrator|operator|user}
Sets the Class-of-Service to define the user’s authority level. The switch defines these levels as:
User, Operator, and Administrator, with User being the most restricted level.
Command mode: Global configuration
access user {<1-10>} name <1-8 characters>
Defines the user name.
Command mode: Global configuration
access user {<1-10>} password <1-128 characters>
Sets the user password.
Command mode: Global configuration
[no] access user {<1-10>} enable
Enables or disables the user ID.
Command mode: Global configuration
show access user
Displays the current user ID configuration.
Command mode: All except User EXEC
Table 4-21 User Access Control Configuration Commands
Command Syntax and Usage