Technical data

RackSwitch G8000 ISCLI Reference
Chapter 4: Configuration Commands
 123BMD00128, September 2009
System Access Configuration
Table 4-18 System Access Configuration Commands
Command Syntax and Usage
[no] access http enable
Enables or disables HTTP (Web) access to the Browser-Based Interface.
The default value is enabled.
Command mode: Global configuration
[default] access http port [<1-65535>]
Sets the switch port used for serving switch Web content. The default is HTTP port 80.
Command mode: Global configuration
[no] access userbbi enable
Enables or disables user configuration access to the Browser-Based Interface (BBI).
Command mode: Global configuration
[no] access telnet enable
Enables or disables Telnet access. The default value is enabled.
Command mode: Global configuration
[default] access telnet port <1-65535>
Sets an optional Telnet server port number for cases where the server listens for Telnet sessions on
a non-standard port.
Command mode: Global configuration
[default] access tftp-port <1-65535>
Sets the TFTP server port number for file transfers.
Command mode: Global configuration
[no] access snmp {read-only|read-write}
Provides read-only/write-read SNMP access.
Command mode: Global configuration
show access
Displays the current system access parameters.
Command mode: All