Technical data

RackSwitch G8000 ISCLI Reference
122
 Chapter 4: Configuration Commands BMD00128, September 2009
SNMPv3 Notify Table Configuration
SNMPv3 uses Notification Originator to send out traps. A notification typically monitors a system for
particular events or conditions, and generates Notification-Class messages based on these events or con-
ditions.
Table 4-17 Notify Table Commands
Command Syntax and Usage
snmp-server notify {<1-16>} name <1-32 characters>
Defines a locally arbitrary, but unique, identifier associated with this SNMP notify entry.
Command mode: Global configuration
snmp-server notify {<1-16>} tag <1-255 characters>
Configures a tag that contains a tag value which is used to select entries in the Target Address
Table. Any entry in the snmpTargetAddrTable, that matches the value of this tag, is selected.
Command mode: Global configuration
show snmp-server v3 notify {<1-16>}
Displays the current notify table configuration.
Command mode: All