Technical data

RackSwitch G8000 ISCLI Reference
Chapter 4: Configuration Commands
 119BMD00128, September 2009
SNMPv3 Community Table Configuration
Use these commands to configure the community table entry. The configured entry is stored in
the community table list in the SNMP engine. This table is used to configure community
strings in the Local Configuration Datastore (LCD) of the SNMP engine.
Table 4-14 SNMPv3 Community Table Configuration Commands
Command Syntax and Usage
snmp-server community {<1-16>} index <1-32 characters>
Allows you to configure the unique index value of a row in this table.
Command mode: Global configuration
snmp-server community {<1-16>} name <1-32 characters>
Defines a readable text string that represents the corresponding value of an SNMP community
name in a security model.
Command mode: Global configuration
snmp-server community {<1-16>} user-name <1-32 characters>
Defines a readable text string that represents the corresponding value of an SNMP community
name in a security model.
Command mode: Global configuration
snmp-server community {<1-16>} tag <1-255 characters>
Allows you to configure a tag. This tag specifies a set of transport endpoints to which a command
responder application sends an SNMP trap.
Command mode: Global configuration
show snmp-server v3 community {<1-16>}
Displays the community table configuration.
Command mode: All