Technical data

RackSwitch G8000 ISCLI Reference
112
 Chapter 4: Configuration Commands BMD00128, September 2009
[no] snmp-server authentication-trap enable
Enables or disables the use of the system authentication trap facility.
The default setting is disabled.
Command mode: Global configuration
[no] snmp-server link-trap port <port number>
Enables or disables the sending of SNMP link up and link down traps.
The default setting is enabled.
Command mode: Global configuration
show snmp-server
Displays the current SNMP configuration.
Command mode: All
Table 4-8 System SNMP Commands
Command Syntax and Usage