Technical data

RackSwitch G8000 ISCLI Reference
Chapter 4: Configuration Commands
 111BMD00128, September 2009
SNMP parameters that can be modified include:
 System name
 System location
 System contact
 Use of the SNMP system authentication trap function
 Read community string
 Write community string
 Trap community strings
Table 4-8 System SNMP Commands
Command Syntax and Usage
[no] snmp-server name <1-64 characters>
Configures the name for the system.
Command mode: Global configuration
[no] snmp-server location <1-64 characters>
Configures the name of the system location.
Command mode: Global configuration
[no] snmp-server contact <1-64 characters>
Configures the name of the system contact.
Command mode: Global configuration
snmp-server read-community <1-32 characters>
Configures the SNMP read community string. The read community string controls SNMP “get”
access to the switch. The default read community string is public.
Command mode: Global configuration
snmp-server write-community <1-32 characters>
Configures the SNMP write community string. The write community string controls SNMP “set”
and “get” access to the switch. The default write community string is private.
Command mode: Global configuration