Manualshelf

Technical data

ManualsBrandsBlade Network Technologies ManualsComputer AccessoriesG8000
101102103104105106107108109110
RackSwitch G8000 ISCLI Reference
Chapter 4: Configuration Commands
109BMD00128, September 2009
[no] tacacs-server secure-backdoor
Enables or disables TACACS+ secure back door access through Telnet/SSH only when the
TACACS+ servers cannot be reached. This feature is recommended to permit access to the switch
when the TACACS+ servers are not available.
The default setting is enabled.
Command mode: Global configuration
[no] tacacs-server command-authorization
Enables or disables TACACS+ command authorization.
Command mode: Global configuration
[no] tacacs-server command-logging
Enables or disables TACACS+ command logging.
Command mode: Global configuration
[no] tacacs-server enable
Enables or disables the TACACS+ server. The default setting is disabled.
Command mode: Global configuration
show tacacs-server
Displays current TACACS+ configuration parameters.
Command mode: All
Table 4-6 TACACS+ Server Commands
Command Syntax and Usage