Technical data

RackSwitch G8000 ISCLI Reference
106
 Chapter 4: Configuration Commands BMD00128, September 2009
RADIUS Server Configuration
Table 4-5 RADIUS Configuration Commands
Command Syntax and Usage
[no] radius-server primary-host <IP address>
Defines the primary RADIUS server address.
Command mode: Global configuration
[no] radius-server secondary-host <IP address>
Defines the secondary RADIUS server address.
Command mode: Global configuration
radius-server primary-host {<IP address>} key <1-32 characters>
This is the primary shared secret between the switch and the RADIUS server(s).
Command mode: Global configuration
radius-server secondary-host {<IP address>} key <1-32 characters>
This is the secondary shared secret between the switch and the RADIUS server(s).
Command mode: Global configuration
radius-server retransmit <1-3>
Sets the number of failed authentication requests before switching to a different RADIUS server.
The default value is three requests.
Command mode: Global configuration
radius-server timeout <1-10>
Sets the amount of time, in seconds, before a RADIUS server authentication attempt is considered
to have failed. The default is three seconds.
Command mode: Global configuration
[no] radius-server enable
Enables or disables the RADIUS server.
Command mode: Global configuration
radius-server port <1500-3000>
Sets RADIUS port number.
Command mode: Global configuration