Technical data

BLADE OS 5.1 Application Guide
BMD00136, November 2009 Chapter 1: Accessing the Switch
 39
Use the Strong Password commands to configure Strong Passwords.
User Access Control
Use the end user access control commands to configure user IDs.
Setting Up User IDs, User Names, and Passwords
Up to 10 user IDs can be configured. Define each user name and password.
Defining a User’s Access Level
The end user is by default assigned to the user access level (also known as class of service, or CoS).
CoS for all user accounts have global access to all resources except for User CoS, which has access
to view only resources that the user owns. For more information, see Table 2 on page 29.
To change the user’s level, enter the class of service
cos command, and select one of the following
options:
Validating a User’s Configuration
Enabling or Disabling a User
An end user account must be enabled before the switch recognizes and permits login under the
account. Once enabled, the switch requires any user to enter both username and password.
>> # access user strong-password enable
>> # access user 1 name <new user name>
>> #
access user 1 password <new user password>
>> # access user 1 level {user|oper|admin}
>> #
show access user uid 1
>> # access user 1 enable
>> # no access user 1 enable