Technical data

BLADE OS 5.1 Application Guide
BMD00136, November 2009 Chapter 14: High Availability
 203
Task 1: Configure G8000 1
1. Configure client and server interfaces.
2. Configure the default gateways. Each default gateway points to a Layer 3 router.
3. Turn on VRRP and configure two Virtual Interface Routers.
>> # interface ip 1
>> (config-ip-if)# ip address 192.168.1.100
>> (config-ip-if)# vlan 10
>> (config-ip-if)# enable
>> (config-ip-if)# exit
>> # interface ip 2
>> (config-ip-if)# ip address 192.168.2.101
>> (config-ip-if)# vlan 20
>> (config-ip-if)# enable
>> (config-ip-if)# exit
>> # interface ip 3
>> (config-ip-if)# ip address 10.0.1.100
>> (config-ip-if)# ip netmask 255.255.255.0
>> (config-ip-if)# enable
>> (config-ip-if)# exit
>> # interface ip 4
>> (config-ip-if)# ip address 10.0.2.101
>> (config-ip-if)# ip netmask 255.255.255.0
>> (config-ip-if)# enable
>> (config-ip-if)# exit
>> # ip gateway 1 address addr 192.168.1.1
>> # ip gateway 1 enable
>> # ip gateway 2 address addr 192.168.2.1
>> # ip gateway 2 enable
>> # router vrrp
>> (config-vrrp)# enable
>> (config-vrrp)# virtual-router 1 virtual-router-id 1
>> (config-vrrp)# virtual-router 1 interface 1
>> (config-vrrp)# virtual-router 1 enable
>> (config-vrrp)# virtual-router 2 interface 2
>> (config-vrrp)# virtual-router 2 enable