Technical data

BLADE OS 5.1 Application Guide
BMD00136, November 2009 Chapter 13: IGMP
 189
Configure IGMP Filtering
1. Enable IGMP Filtering on the switch.
2. Define an IGMP filter.
3. Assign the IGMP filter to a port.
>> # ip igmp filtering
>> # ip igmp profile 1 range 224.0.1.0 226.0.0.0
>> # ip igmp profile 1 action deny
>> # ip igmp profile 1 enable
>> # interface port 3
>> (config-if)# ip igmp profile 1
>> (config-if)# ip igmp filtering