Technical data

BLADE OS 5.1 Application Guide
162
 Chapter 11: OSPF BMD00136, November 2009
3. Define the backbone.
The backbone is always configured as a transit area using areaid 0.0.0.0.
4. Define the stub area.
5. Attach the network interface to the backbone.
6. Attach the network interface to the stub area.
>> (config-router-ospf)# area 0 area-id 0.0.0.0
>> (config-router-ospf)# area 0 type transit
>> (config-router-ospf)# area 0 enable
>> (config-router-ospf)# area 1 area-id 0.0.0.1
>> (config-router-ospf)# area 1 type stub
>> (config-router-ospf)# area 1 enable
>> (config-router-ospf)# exit
>> # interface ip 1
>> (config-ip-if)# ip ospf area 0
>> (config-ip-if)# ip ospf enable
>> (config-ip-if)# exit
>> # interface ip 2
>> (config-ip-if)# ip ospf area 1
>> (config-ip-if)# ip ospf enable
>> (config-ip-if)# exit