Technical data

BLADE OS 5.1 Application Guide
BMD00136, November 2009 Chapter 7: Quality of Service
 107
To filter broadcast packets on a port, use the following commands:
To filter multicast packets on a port, use the following commands:
To filter unknown unicast packets on a port, use the following commands:
RS G8000 (config)# interface port 1
RS G8000 (config-if)# broadcast-threshold <packet rate (0-2097151)>
RS G8000 (config-if)# exit
RS G8000 (config)# interface port 1
RS G8000 (config-if)# multicast-threshold <packet rate (0-2097151)>
RS G8000 (config-if)# exit
RS G8000 (config)# interface port 1
RS G8000 (config-if)# dest-lookup-threshold <packet rate (0-2097151)>
RS G8000 (config-if)# exit