Technical data

BLADE OS 5.0 Command Reference
BMD00142, November 2009 Chapter 4: The Information Menu
 93
/info/l3/rip/routes
RIP Routes Information
This table contains all dynamic routes learnt through RIP, including the routes that are undergoing
garbage collection with metric = 16. This table does not contain locally configured static routes.
/info/l3/rip/dump <interface number>
RIP Interface Information
/info/l3/ecmp
ECMP Static Route Information
ECMP route information shows the status of each ECMP route configured on the switch.
>> IP Routing# /info/l3/rip/routes
30.1.1.0/24 directly connected
3.0.0.0/8 via 30.1.1.11 metric 4
4.0.0.0/16 via 30.1.1.11 metric 16
10.0.0.0/8 via 30.1.1.2 metric 3
20.0.0.0/8 via 30.1.1.2 metric 2
RIP USER CONFIGURATION :
RIP on update 30
RIP Interface 1 : 10.4.4.2, enabled
version 2, listen enabled, supply enabled, default none
poison disabled, split horizon enabled, trigg enabled,
mcast enabled, metric 1
auth none,key none
Current ecmp static routes:
Destination Mask Gateway If GW Status
--------------- --------------- --------------- ---- -----------
10.10.1.1 255.255.255.255 100.10.1.1 1 up
200.20.2.2 1 down
10.20.2.2 255.255.255.255 10.233.3.3 1 up
10.20.2.2 255.255.255.255 10.234.4.4 1 up
10.20.2.2 255.255.255.255 10.235.5.5 1 up
ECMP health-check ping interval: 1
ECMP health-check retries number: 3