Technical data

BLADE OS 5.0 Command Reference
82
 Chapter 4: The Information Menu BMD00142, November 2009
/info/l3/route
IP Routing Information
Using the commands listed below, you can display all or a portion of the IP routes currently held in
the switch.
[IP Routing Menu]
find - Show a single route by destination IP address
gw - Show routes to a single gateway
type - Show routes of a single type
tag - Show routes of a single tag
if - Show routes on a single interface
dump - Show all routes
Table 26 Route Information Options
Command Syntax and Usage
find <IP address (such as 192.4.17.101)>
Displays a single route by destination IP address.
gw <default gateway address (such as 192.4.17.44)>
Displays routes to a single gateway.
type indirect|direct|local|broadcast|martian|multicast
Displays routes of a single type. For a description of IP routing types, see Table 27 on
page 83.
tag fixed|static|addr|rip|ospf|broadcast|martian|multicast
Displays routes of a single tag. For a description of IP routing types, see Table 28 on page 84.
if <interface number>
Displays routes on a single interface.
dump
Displays all routes configured in the switch. For more information, see page 83.