Technical data

BLADE OS 5.0 Command Reference
BMD00142, November 2009 Appendix A: BLADE OS Syslog Messages
 339
MGMT scp<username>(<user type>) login {on Console|from host <IP address>}
MGMT second syslog host changed to {this host|<IP address>}
MGMT selectable [boot] mode changed
MGMT STP BPDU statistics cleared
MGMT switch reset from CLI
MGMT syslog host changed to {this host| <IP address>}
MGMT System clock set to <time>.
MGMT System date set to <date>.
MGMT Tacacs authentication has been enabled. Please try again with a Tacacs user and
password.
MGMT Terminating BBI connection from host <IP address>
MGMT User <username> deleted by {SNMP user|<username>}.
MGMT User <username> is {deleted|disabled} and will be ejected by {SNMP
user|<username>}
MGMT User oper|operator is disabled and will be ejected by {SNMP
user|<username>}.
MGMT Wrong config file type
NTP System clock updated
OSPF Neighbor Router ID <router ID>, Neighbor State
{Down|Loopback|Waiting|PToP|DR|BackupDR|DR
Other|Attempt|Init|2 Way|ExStart|Exchange|Loading|Full}
SERVER link {down|up} on port <port>
SERVER MAC address <MAC address> for Vlan <VLAN> on {<trunk>|Port <port>}
was {added to|removed from} network
SSH (remote disconnect msg)
SSH
<username>(<user type>) {logout|ejected|idle timeout|connection closed}
from {Console|Telnet/SSH}
SSH <username>(<user type>) login {on Console|from host <IP address>}
SSH Error in setting the new config
Thread Message