Technical data

BLADE OS 5.0 Command Reference
BMD00142, November 2009 Appendix A: BLADE OS Syslog Messages
 337
CONSOLE RADIUS: No configured RADIUS server
CONSOLE RADIUS: trying alternate server...
HOTLINKS "Error" is set to "Standby|Active"
HOTLINKS "Learning" is set to "Standby|Active"
HOTLINKS "None" is set to "Standby|Active"
HOTLINKS "Side Max" is set to "Standby|Active"
HOTLINKS has no "{Side Max|None|Learning|Error}" interface
IP default gateway <IP address> {disabled|enabled|operational}
IP Either Route or Arp table is full. Please check GEA L3 statistics (/stat/l3/gea) to
verify.
IP {MGTA|MGTB} port default gateway <IP address> operational
IP New Multicast router learned on <IP address>, Vlan <VLAN>, Version
V<version>
IP On Vlan <VLAN> IGMP version updated to <version>
IP Warning: DHCP will be disabled
IP Warning: Enabling dhcp will delete IP interface <interface> and IP gateway
<gateway>'s configurations.
IP Warning: gateway (<gateway>) will be deleted
LACP LACP is {up|down} on port <port>
MGMT <username> automatically logged out from BBI because changing of
authentication type
MGMT <username>(<user type>) {logout|ejected|idle timeout|connection closed}
from {BBI|Console|Telnet/SSH}
MGMT <username>(<user type>) login {on Console|from host <IP address>|from
BBI}
MGMT ACL <old number> from old configuration file moved to ACL <new number> in
new configuration file
MGMT Authentication failed for backdoor.
MGMT Authentication failed for backdoor. Password incorrect!
Thread Message