Technical data

BLADE OS 5.0 Command Reference

334

 Appendix A: BLADE OS Syslog Messages BMD00142, November 2009

OSPF Neighbor Router ID <router ID>, Neighbor State

{Down|Attempt|Init|2Way|ExStart|Exchange|Loading|Full|Loopback|W

aiting|PToP|DR|BackupDR|DR Other}

OSPF OSPF Route table full: likely incorrect/missing routes

STP CIST new root bridge

STP CIST topology change detected

STP Fast Forward port <port> active, putting port into forwarding state

STP New preferred Fast Uplink port <port> active for STG <STG>, restarting timer

STP own BPDU received from port <port>

STP Port <port>, putting port into blocking state

STP Preferred STG <STG> Fast Uplink port has gone down. Putting secondary Fast

Uplink port <port> into forwarding

STP Setting STG <STG> Fast Uplink primary port <port> forwarding and backup

port <port> blocking

STP STG <STG> preferred Fast Uplink port <port> active. Waiting <seconds>

seconds before switching from port <port>

STP STG <STG>, new root bridge

STP STG <STG>, topology change detected

STP STG <STG> root port <port> has gone down. Putting backup Fast Uplink port

<port> into forwarding

SYSTEM <SFP type> inserted at port <port> is UNAPPROVED ! Device is DISABLED.

SYSTEM LACP trunk <trunk ID> and <trunk ID> formed with admin key <key>

SYSTEM link down on management port <port>

VRRP received errored advertisement from <IP address>

VRRP received incorrect addresses from <IP address>

VRRP received incorrect advertisement interval <interval> from

VRRP received incorrect VRRP adver type from <IP address>

VRRP received incorrect VRRP authentication type from <IP address>

VRRP received incorrect VRRP password from <IP address>

Thread Message