Technical data

BLADE OS 5.0 Command Reference
330
 Chapter 9: The Maintenance Menu BMD00142, November 2009
/maint/cldmp
Clearing Dump Information
To clear dump information from flash memory, at the Maintenance# prompt, enter:
The switch clears the dump region of flash memory and displays the following message:
If the flash dump region is already clear, the switch displays the following message:
Unscheduled System Dumps
If there is an unscheduled system dump to flash memory, the following message is displayed when
you log on to the switch:
Maintenance# cldmp
FLASH dump region cleared.
FLASH dump region is already clear.
Note: A system dump exists in FLASH. The dump was saved
at 13:43:22 Wednesday January 30, 2009. Use /maint/uudmp to
extract the dump for analysis and /maint/cldmp to
clear the FLASH region. The region must be cleared
before another dump can be saved.