Technical data

BLADE OS 5.0 Command Reference
BMD00142, November 2009 Chapter 2: First-Time Configuration
 33
6. Enter the current administrator password at the prompt:
Note – If you forget your administrator password, call your technical support representative for
help using the password fix-up mode.
7. Enter the new administrator password at the prompt:
8. Enter the new administrator password, again, at the prompt:
9. Apply and save your change by entering the following commands:
Changing the Default User Password
The user login has limited control of the switch. Through a user account, you can view switch
information and statistics, but you can’t make configuration changes.
The default password for the user account is user. This password can be changed from the user
account. The administrator can change all passwords, as shown in the following procedure.
1. Connect to the switch and log in using the admin password.
2. From the Main Menu, use the following command to access the Configuration Menu:
3. From the Configuration Menu, use the following command to select the System Menu:
4. From the System Menu, use the following command to select the System Access Menu:
Changing ADMINISTRATOR password; validation required...
Enter current administrator password:
Enter new administrator password:
Re-enter new administrator password:
System# apply
System# save
Main# cfg
>> Configuration# sys
>> System# access