Technical data

BLADE OS 5.0 Command Reference

BMD00142, November 2009 Chapter 9: The Maintenance Menu

 325

/maint/route

IP Route Manipulation

Note – To display all routes, you can also refer to “IP Routing Information” on page 82.

[IP Routing Menu]

find - Show a single route by destination IP address

gw - Show routes to a single gateway

type - Show routes of a single type

tag - Show routes of a single tag

if - Show routes on a single interface

dump - Show all routes

clear - Clear route table

Table 192 IP Route Manipulation Options

Command Syntax and Usage

find <IP address (such as, 192.4.17.101)>

Shows a single route by destination IP address.

gw <default gateway address (such as, 192.4.17.44)>

Shows routes to a default gateway.

Shows routes of a single type. For a description of IP routing types, see Table 27 on page 83

Shows routes of a single tag. For a description of IP routing tags, see Table 28 on page 84

if <interface number>

Shows routes on a single interface.

dump

Shows all routes.

clear

Clears the route table from switch memory.