Technical data

BLADE OS 5.0 Command Reference
316
 Chapter 8: The Boot Options Menu BMD00142, November 2009
The system informs you of which image is currently set to be loaded at the next reset, and prompts
you to enter a new choice:
Uploading a Software Image from Your Switch
You can upload a software image from the switch to a FTP or TFTP server.
1. At the Boot Options# prompt, enter:
2. The system prompts you for information. Enter the desired image:
3. Enter the name or the IPv4 address of the FTP or TFTP server:
4. Enter the name of the file into which the image will be uploaded on the FTP or TFTP server:
5. The system then requests confirmation of what you have entered. To have the file uploaded, enter Y.
Currently set to use switch software "image1" on next reset.
Specify new image to use on next reset ["image1"/"image2"]:
Boot Options# ptimg
Enter name of switch software image to be uploaded
["image1"|"image2"|"boot"]: <image>
Enter hostname or IP address of FTP/TFTP server: <name or IP address>
Enter name of file on FTP/TFTP server: <filename>
image2 currently contains Software Version 5.0
that was downloaded at 0:23:39 Thu Jan 4, 2009.
Upload will transfer image2 (2788535 bytes) to file "image1"
on FTP/TFTP server 192.1.1.1.
Confirm upload operation (y/n) ? y