Technical data

BLADE OS 5.0 Command Reference
BMD00142, November 2009 Chapter 6: The Configuration Menu
 305
/cfg/l3/vrrp/track
VRRP Tracking Configuration
This menu is used for setting weights for the various criteria used to modify priority levels during
the master router election process. Each time one of the tracking criteria is met (see “VRRP Virtual
Router Priority Tracking” on page 299), the priority level for the virtual router is increased by an
amount defined through this menu.
Note – These priority tracking options only define increment values. These options do not affect
the VRRP master router election process until options under the VRRP Virtual Router Priority
Tracking menu (see page 299) are enabled.
[VRRP Tracking Menu]
vrs - Set priority increment for virtual router tracking
ifs - Set priority increment for IP interface tracking
ports - Set priority increment for VLAN switch port tracking
cur - Display current VRRP Priority Tracking configuration
Table 183 VRRP Tracking Options
Command Syntax and Usage
vrs <0-254>
Defines the priority increment value (0 through 254) for virtual routers in master mode
detected on this switch. The default value is 2.
ifs <0-254>
Defines the priority increment value (0 through 254) for active IP interfaces detected on this
switch. The default value is 2.
ports <0-254>
Defines the priority increment value (0 through 254) for active ports on the virtual router’s
VLAN. The default value is 2.
cur
Displays the current configuration of priority tracking increment values.