Technical data

BLADE OS 5.0 Command Reference
BMD00142, November 2009 Chapter 6: The Configuration Menu
 303
/cfg/l3/vrrp/group/track
Virtual Router Group Priority Tracking Configuration
Note – If Virtual Router Group Tracking is enabled, then the tracking option will be available only
under group option. The tracking setting for the other individual virtual routers will be ignored.
del
Deletes the virtual router group from the switch configuration.
cur
Displays the current configuration information for the virtual router group.
Table 180 Virtual Router Group Options
Command Syntax and Usage
[Virtual Router Group Priority Tracking Menu]
ifs - Enable/disable tracking other interfaces
ports - Enable/disable tracking VLAN switch ports
cur - Display current VRRP Group Tracking configuration
Table 181 Virtual Router Group Priority Tracking Options
Command Syntax and Usage
ifs disable|enable
When enabled, the priority for this virtual router will be increased for each other IP interface
active on this switch. An IP interface is considered active when there is at least one active port
on the same VLAN. This helps elect the virtual routers with the most available routes as the
master. This command is disabled by default.
ports disable|enable
When enabled, the priority for this virtual router will be increased for each active port on the
same VLAN. A port is considered “active” if it has a link and is forwarding traffic. This helps
elect the virtual routers with the most available ports as the master. This command is disabled
by default.
cur
Displays the current configuration for priority tracking for this virtual router.